Now that your home bar or man cave has its own kegerator to cool and dispense that frothy beer you love a great deal, it will be smart to get familiar with a number of the essential elements of your kegerator. One of the most important areas of your kegerator will be the keg coupler.

What the Keg Coupler Does? Consider the keg coupler being a “key” and the valve of the keg as the “lock”. They cannot work without one another. The keg coupler connects for the device as well as a Carbon dioxide compressed gasoline line. It allows the compressed air to get in the keg and push out your dark beer.

d keg coupler

Because of most of these components working together, you receive a flawlessly ice cold and delicious draft beer inside the convenience your home.

Types of Keg Couplers – This is when it turns into a small bit harder. Depending on which kind of beer design you might have in your kegerator, you may require a different form of coupler in order to serve it correctly.

To select the correct coupler to your home use, you must know the brand/type of dark beer you serve, know in which it absolutely was brewed and/or how big keg it really is in. The reason being you can find six several types of keg couplers. Here is a quick rundown of the different types of commercial keg couplers.

D Coupler – Suits U.S. Sankey Keg Valves

A Coupler – Fits Most German Keg Valves

G Coupler – Fits Some Western Keg Valves

M Coupler – Suits Some German Keg Valves

S Coupler – Suits European Sankey Keg Valves

U Coupler – Fits Some Western Keg Valves

In order for the dark beer to be offered correctly, it must have to have the correct type of coupler that fits the valve in the keg. The type of coupler you need will depend on in which that specific beer was kegged.

As an example, the American Sankey “D” System coupler is readily the most famous. It suits all domestic brand name kegs, as well as 95% of United states beers. If this is all you are considering consuming out of your kegerator, then this is the coupler you should select.

For those who have any questions as to which kind of keg coupler you require, it might be a good idea to contact the local supplier, the shop from where you got your keg or possibly even the brewery alone. For fast guide on the most famous beers, make sure you make reference to our handy set of keg couplers required for various brands of beer.

How you can Install Your Keg Coupler

To put in your keg coupler in your kegerator, you have to first affix the Carbon dioxide regulator to the Carbon dioxide cylinder. Ensure that the cylinder is loaded and the device is shut. Then, safely set in the regulator for the Carbon dioxide tube. Affix the gas line to the “gas out” dock in the regulator and safe in position with a clamp. Then, attach one other finish in the gasoline line towards the “gas in” dock around the coupler. Next, attach the dark beer line for the fluid out dock in the coupler.

Now, you are ready to connect the coupler for the keg. Ensure that the Carbon dioxide tube vale is incorporated in the “off” position as well as the pull handle from the coupler is in the diagonal/upper position. Get the locking throat around the kegerator, and turn the coupler clockwise 25°. Then, take out on the handle, drive it down in to the keg valve and launch the handle. This may lock the coupler in ejqnby and securely affix it towards the kegerator.

With all the coupler linked to the keg, gradually turn on the Carbon dioxide tube. At this particular point, you are going to listen to gasoline flowing through the CO2 cylinder and regulator through the keg coupler and in to the keg. Draw around the pressure relief device to permit gas to vent and give you an accurate reading through on the stress gauge, then calibrate the regulator to the recommended serving stress for your beer. You happen to be now able to serve your very own draft beer.

Standard Keg Coupler – Check This Out..